Fabric Tensile Strength Tester is a device used to test the tensile properties of fabrics. It can measure the mechanical properties of fabrics under different stretching conditions, including tensile strength, elongation, breaking strength, etc. The following are the operating steps of the fabric tensile strength machine:

1. Equipment preparation

First of all, it is necessary to check whether the parameters of the fabric tensile strength machine meet the requirements, including the maximum test force, test speed, test distance, etc. Then, install the test fixture to the equipment, and select the appropriate tensile fixture and fixture width as required.

2. Sample preparation

Cut the fabric sample to be tested into the specified size and shape, and mark and number it according to the standard requirements. Usually, the test sample of the fabric tensile strength machine should be a long strip with a width of 25mm and a length of 200mm.

3. Sample holding

Clamp the fabric sample into the test jig, and adjust the width and clamping force of the jig manually or electrically to ensure that the position of the jig clamping the sample is accurate and stable.

4. Parameter setting

Set test parameters on the control panel of the fabric tensile strength machine, including test speed, test force, test distance, etc. Normally, the test speed is 100mm/min, the test force is 1000N, and the test distance is 200mm.

5. Start the test

Press the test button on the control panel to start the test program of the fabric tensile strength machine. The device will automatically apply the tensile force until the sample breaks or the set test distance is reached. At the same time, the device will automatically record the test data and display the test results on the control panel.

6. Data processing

After the test is completed, the test data can be exported to the computer for data processing and analysis. Usually, it is necessary to calculate the tensile strength, elongation, breaking strength and other indicators of the fabric, and perform statistical analysis and comparison.

It should be noted that during the operation of the fabric tensile strength machine, relevant test standards and requirements should be followed to ensure the accuracy and reliability of the test results. At the same time, attention should also be paid to the maintenance and maintenance of the equipment to prolong the service life of the equipment.