Composition and structure of Velcro fatigue strength tester
The adhesive tape fatigue strength tester tests the repeated peeling and bonding actions of adhesive tape (Velcro tape). After a certain number of times, the test piece is rolled uniformly with the roller's weight, and then the tensile testing machine is used to measure its adhesion and bonding strength.
Shanghai Qianshi Precision Electromechanical Technology Co., Ltd., as a modern technology enterprise integrating research and development, manufacturing, sales, training, and service, is committed to bringing more testing instruments to the market, providing textile, leather, combustion, automotive interior and exterior parts, material environmental climate aging, and other testing instruments. It can also accept non-standard customization and conduct targeted tests according to customer requirements before purchase to ensure the applicability of the purchased instruments.
Applicable standards:
DIN 3415, GB/T 3903.20, GB/T 3903.21, GB/T 23315, ISO 22777, ISO 22776, SATRA PM123
Test principle:
The hook side and the wool side (also called the loop side) of the Velcro are fixed on two rollers with diameters of 162.5 mm and 160 mm respectively. The hook side and the wool side Velcro of the two rollers are in contact, and a certain load is added according to their width. The lower roller is the power wheel, which drives the load roller to rotate repeatedly so that the Velcro fixed on the roller is continuously fitted and peeled off to achieve the purpose of fatigue.
Technical parameters:
1. Roller diameter: upper wheel φ162.5mm, lower wheel φ160mm
2. Roller width: 70mm
3. Rolling speed: 60rpm/min
4. Reversal time: 30S reversal
5. Test load: 5kg
6. Clamp slot: width 4mm, length 55±2mm
7. Horsepower: AC1/8HP dual-frequency motor
8. Counter: LCD, 0-999, 999
The whole machine is mainly composed of the following parts:
1. Counterweight: used in conjunction with the driven wheel, the pressure is 5kg.
2. Driving wheel: diameter 160mm, driven by the motor to rotate, the speed is 60rpm, and the direction is reversed every 30s. The ring surface is fixed on the driving wheel.
3. Driven wheel: diameter 162.5mm, driven by the driving wheel to rotate. The hook surface is fixed on the driven wheel.
4. Counter: set and display the number of movement circles.
5. Buttons: including emergency stop button, start, and pause button.