The Fiber microtome is an instrument for preparing sections of fibre samples for use in the study and analysis of fibre materials. It allows fibre samples to be sliced into thin sections for easy observation and measurement. This article will introduce the role of the Fiber microtome and how to use it.

I. Role of the Fiber microtome

The Fiber microtome is primarily used to prepare sections of fibre samples for the following purposes.

Studying and analysing fibre structure and morphology, such as fibre shape, size, length, diameter, wall thickness etc.

Observe the morphology and structure of fibre surfaces, such as surface morphology, texture, porosity, etc.

Measure the physical and chemical properties of fibres, such as density, strength, elasticity, moisture absorption, chemical composition, etc.

II. How to use the Fiber microtome?

The use of the Fiber microtome requires attention to the following points.

Sample preparation: The sample should be a dry, unadulterated, appropriately sized sample of fibre. The length and diameter of the sample should meet the requirements of the Fiber microtome.

Adjusting the slicer: Adjust the slicing thickness, slicing speed and slicing die of the slicer according to the size and requirements of the sample.

Sample preparation: Fix the sample in the slicing mould, adjust the working condition of the slicer and start sample preparation. The slicer should be cleaned promptly.

Observe the sample: After preparation, remove the sample and place it under the microscope for observation. The sample can be treated with reagents such as stain for better observation and measurement.

Analysing data: Data from observations and measurements are recorded, analysed and compared. Graphs etc. can be used to present the data and results.

In summary, the Fiber microtome equipment is an important tool for fibre research and mastering its use and techniques can improve the quality and efficiency of fibre research. When using the Fiber microtome, safety and maintenance should be observed to keep the slicer in good condition.